澳门新葡新京官方网站

The HTTP2 Upgrade Protocol

Table of Contents

Introduction

The HTTP Upgrade Protocol element represents an Upgrade Protocol component that supports the HTTP/2 protocol. An instance of this component must be associated with an existing HTTP/1.1 Connector.

HTTP/2 connectors use non-blocking I/O, only utilising a container thread from the thread pool when there is data to read and write. However, because the Servlet API is fundamentally blocking, each HTTP/2 stream requires a dedicated container thread for the duration of that stream.

Attributes

Common Attributes

All implementations of Upgrade Protocol澳门新葡新京官方网站 support the following attributes:

Attribute Description
className

This must be org.apache.coyote.http2.Http2Protocol.

Standard Implementation

The HTTP/2 Upgrade Protocol implementation supports the following attributes in addition to the common attributes listed above.

Attribute Description
allowedTrailerHeaders

By default Tomcat will ignore all trailer headers when processing HTTP/2 connections. For a header to be processed, it must be added to this comma-separated list of header names.

compressibleMimeType

The value is a comma separated list of MIME types for which HTTP compression may be used. The default value is text/html,text/xml,text/plain,text/css,text/javascript,application/javascript,application/json,application/xml .

compression

The HTTP/2 protocol may use compression in an attempt to save server bandwidth. The acceptable values for the parameter is "off" (disable compression), "on" (allow compression, which causes text data to be compressed), "force" (forces compression in all cases), or a numerical integer value (which is equivalent to "on", but specifies the minimum amount of data before the output is compressed). If the content-length is not known and compression is set to "on" or more aggressive, the output will also be compressed. If not specified, this attribute is set to "off".

Note: There is a tradeoff between using compression (saving your bandwidth) and using the sendfile feature (saving your CPU cycles). If the connector supports the sendfile feature, e.g. the NIO2 connector, using sendfile will take precedence over compression. The symptoms will be that static files greater that 48 Kb will be sent uncompressed. You can turn off sendfile by setting useSendfile attribute of the protocol, as documented below, or change the sendfile usage threshold in the configuration of the DefaultServlet in the default conf/web.xml or in the web.xml澳门新葡新京官方网站 of your web application.

compressionMinSize

If compression澳门新葡新京官方网站 is set to "on" then this attribute may be used to specify the minimum amount of data before the output is compressed. If not specified, this attribute is defaults to "2048".

initialWindowSize

Controls the initial size of the flow control window for streams that Tomcat advertises to clients. If not specified, the default value of 65535 is used.

keepAliveTimeout

The time, in milliseconds, that Tomcat will wait between HTTP/2 frames when there is no active Stream before closing the connection. Negative values will be treated as an infinite timeout. If not specified, a default value of 20000 will be used.

maxConcurrentStreamExecution

The controls the maximum number of streams for any one connection that can be allocated threads from the container thread pool. If more streams are active than threads are available, those streams will have to wait for a stream to become available. If not specified, the default value of 20 will be used.

maxConcurrentStreams

The controls the maximum number of active streams permitted for any one connection. If a client attempts to open more active streams than this limit, the stream will be reset with a STREAM_REFUSED error. If not specified, the default value of 100澳门新葡新京官方网站 will be used.

maxHeaderCount

The maximum number of headers in a request that is allowed by the container. A request that contains more headers than the specified limit will be rejected. A value of less than 0 means no limit. If not specified, a default of 100 is used.

maxHeaderSize

The maximum total size for all headers in a request that is allowed by the container. Total size for a header is calculated as the uncompressed size of the header name in bytes, plus the uncompressed size of the header value in bytes plus an HTTP/2 overhead of 3 bytes per header. A request that contains a set of headers that requires more than the specified limit will be rejected. A value of less than 0 means no limit. If not specified, a default of 8192 is used.

maxTrailerCount

The maximum number of trailer headers in a request that is allowed by the container. A request that contains more trailer headers than the specified limit will be rejected. A value of less than 0 means no limit. If not specified, a default of 100 is used.

maxTrailerSize

The maximum total size for all trailer headers in a request that is allowed by the container. Total size for a header is calculated as the uncompressed size of the header name in bytes, plus the uncompressed size of the header value in bytes plus an HTTP/2 overhead of 3 bytes per header. A request that contains a set of trailer headers that requires more than the specified limit will be rejected. A value of less than 0 means no limit. If not specified, a default of 8192 is used.

noCompressionStrongETag

This flag configures whether resources with a stong ETag will be considered for compression. If true, resources with a strong ETag will not be compressed. The default value is true.

This attribute is deprecated. It will be removed in Tomcat 10 onwards where it will be hard-coded to true.

noCompressionUserAgents

The value is a regular expression (using java.util.regex) matching the user-agent header of HTTP clients for which compression should not be used, because these clients, although they do advertise support for the feature, have a broken implementation. The default value is an empty String (regexp matching disabled).

overheadContinuationThreshold

The threshold below which the payload size of a non-final CONTINUATION frame will trigger an increase in the overhead count (see overheadCountFactor). The overhead count will be increased by overheadContinuationThreshold/payloadSize so that the smaller the CONTINUATION frame, the greater the increase in the overhead count. A value of zero or less disables the checking of non-final CONTINUATION frames. If not specified, a default value of 1024 will be used.

overheadCountFactor

The factor to apply when counting overhead frames to determine if a connection has too high an overhead and should be closed. The overhead count starts at -10. The count is decreased for each data frame sent or received and each headers frame received. The count is increased by the overheadCountFactorfor each setting received, priority frame received and ping received. If the overhead count exceeds zero, the connection is closed. A value of less than 1 disables this protection. In normal usage a value of 3 or more will close the connection before any streams can complete. If not specified, a default value of 1 will be used.

overheadDataThreshold

The threshold below which the average payload size of the current and previous non-final DATA frames will trigger an increase in the overhead count (see overheadCountFactor). The overhead count will be increased by overheadDataThreshold/average so that the smaller the average, the greater the increase in the overhead count. A value of zero or less disables the checking of non-final DATA frames. If not specified, a default value of 1024澳门新葡新京官方网站 will be used.

overheadWindowUpdateThreshold

The threshold below which the average size of current and previous WINDOW_UPDATE frame will trigger an increase in the overhead count (see overheadCountFactor). The overhead count will be increased by overheadWindowUpdateThreshold/average so that the smaller the average, the greater the increase in the overhead count. A value of zero or less disables the checking of WINDOW_UPDATE frames. If not specified, a default value of 1024 will be used.

readTimeout

The time, in milliseconds, that Tomcat will wait for additional data when a partial HTTP/2 frame has been received. Negative values will be treated as an infinite timeout. If not specified, a default value of 5000 will be used.

streamReadTimeout

The time, in milliseconds, that Tomcat will wait for additional data frames to arrive for the stream when an application is performing a blocking I/O read and additional data is required. Negative values will be treated as an infinite timeout. If not specified, a default value of 20000澳门新葡新京官方网站 will be used.

streamWriteTimeout

The time, in milliseconds, that Tomcat will wait for additional window update frames to arrive for the stream and/or conenction when an application is performing a blocking I/O write and the stream and/or connection flow control window is too small for the write to complete. Negative values will be treated as an infinite timeout. If not specified, a default value of 20000 will be used.

writeTimeout

The time, in milliseconds, that Tomcat will wait to write additional data when an HTTP/2 frame has been partially written. Negative values will be treated as an infinite timeout. If not specified, a default value of 5000 will be used.

The HTTP/2 upgrade protocol will also inherit the following limits from the HTTP Connector it is nested with:

  • maxCookieCount
  • maxParameterCount
  • maxPostSize
  • maxSavePostSize

Nested Components

澳门新葡新京官方网站This component does not support any nested components.

Special Features

澳门新葡新京官方网站This component does not support any special features.

Comments

Notice: This comments section collects your suggestions on improving documentation for Apache Tomcat.

If you have trouble and need help, read page and ask your question on the tomcat-users . Do not ask such questions here. This is not a Q&A section.

The Apache Comments System is explained here. Comments may be removed by our moderators if they are either implemented or considered invalid/off-topic.

澳门威尼斯app下载-澳门新葡新京官方网站 新葡萄京娱乐场app_新葡萄京官网-首恶 55402com永利-永利402com官方澳门新葡新京官方网站 千赢官网娱乐网站登录-澳门新葡新京官方网站 库博体育-澳门新葡新京官方网站 im体育app-澳门新葡新京官方网站 365bet亚洲官方投注-澳门新葡新京官方网站 新葡的京集团350vip-官网澳门新葡新京官方网站 澳门拉斯维加斯线上游戏_澳门新葡新京官方网站 金沙-金沙澳门官网